Привет, нужна помощь?

Аксессуар для 3D-принтера - ELEGOO Mercury XS Комплект для мойки и отверждения (7 000 мл мойка, УФ-отверждение)

Спецификации:
ID товара: 164663634
Только в приложении Pigu PLUS участникам! Получи до 4x больше Pigu-Евро!*
  • Полная цена
  • 24 мес. без процентов
    От 710 € x 24 мес.
    или
    От 365 € x 60 мес.

Цена Pigu PLUS

13773 €

Обычная цена

17216 €

Цена Pigu PLUS

13773 €
Стоимость товара 13772 € при заключении договора на срок 24 месяцев, ежемесячный платеж - 710 €, годовая процентная ставка - 0,00%, ежемесячная плата за договор - 0.99%, плата за заключение договора - 0%, BVKKMN - 23,58%, общая сумма к оплате - 17040 €. Поставщик услуги: „AS Inbank filialas“.
Продавец:
Mercora4.8
от 14499 €

БЕСПЛАТНО заберите в Вильнюсе, в магазине (Проспект Лайсвес 75)

3 декабря

000 €

БЕСПЛАТНО заберите в Каунасе, в Клайпеде, в Шяуляй, в Паневежисе, в магазине

3 декабря

000 €

Доставим на дом

4 декабря

499 €

Внимание! Сроки доставки являются предварительными, так как cроки обновляются в зависимости от фактического времени размещения заказа и оплаты. Окончательный срок доставки указывается продавцом после подтверждения заказа.

Предложения других продавцов
Kouket
15566 €
Продавец:
Mercora4.8
  • 97% покупателей рекомендовали бы этого продавца.

Описание товара: Аксессуар для 3D-принтера - ELEGOO Mercury XS Комплект для мойки и отверждения (7 000 мл мойка, УФ-отверждение)

ELEGOO Mercury XS 3D Print Washing and Curing Kit

The ELEGOO Mercury XS is the ideal solution for processing 3D prints, making it easy to both wash and cure resin models. With this kit, you can achieve a perfect finish on your models, eliminating resin residue and ensuring optimal results. The product is designed with ease of use and safety in mind, making it fun and intuitive to use.

Washing and curing in one

The ELEGOO Mercury XS offers two modules: a washing station and a curing station, which allow for comprehensive finishing of 3D models. The washing module effectively removes resin residue, ensuring the model is clean and ready for curing. The curing module uses UV light to finally fix and strengthen the structure of the print. With this kit, your entire post-production process will become simpler and faster, without the need to purchase two separate devices.

Even curing

The curing station is equipped with adjustable L-shaped lights and a 360° rotating platform to ensure full UV coverage on each side of the model. In addition, 4 LEDs located under the platform and a Fresnel lens emit light with a fixed wavelength of 405 nm, ensuring even curing of even the most complex models.

Precision in hard-to-access areas

The kit also includes a handy UV lamp for curing the interiors and nooks and crannies of the model, which is especially useful for prints with complex shapes. The lamp is also great for models that need to be cured after assembly.

Efficient cleaning of large models

The ELEGOO Mercury XS offers as much as 7,000 ml of capacity in a sealed wash tank, allowing for easy cleaning of both large models and smaller printed parts at the same time. Such a large working space saves time and also increases the efficiency of the cleaning process, which is especially important when working on larger projects. For the Saturn 4 and Jupiter series, the mounting platform must be removed before cleaning. For other models, refer to the maximum cleaning height and determine if it is necessary to remove the platform.

UV protection and automatic shutdown

The transparent cover of the curing station blocks up to 99.9% of UV rays, which not only speeds up the curing process, but also protects the user's eyesight. In addition, a safety system turns off the UV light automatically when the cover is removed, minimizing the risk of UV exposure.

Easy operation - everything under control

An intuitive interface with a simple dial and button allows for easy operation of both washing and curing functions. The working time can be adjusted up to 30 minutes to suit the needs of a particular model. Simply hold down the dial for 3 seconds to start the device and quickly proceed with the processing.

Included

  • Mercury XS Wash station
  • Mercury XS Cure curing station
  • Curing lamp
  • Handheld UV lamp
  • Anti-UV cover
  • Water tank
  • Protective goggles
  • Wash basket
  • Adapter
  • Operating instructions
  • Tools

Mercury XS WASH

Control method Knob + button
Rated power 12W
Input voltage 110V/240V 50/60Hz
Time setting 0-30 minutes
Machine size 255mm x 155mm x 385.5mm
Net weight of the machine 2.27 kg
Maximum cleaning volume with platform: 180mm x 121mm x 153mm; without platform: 201mm x 124mm x 255mm

Mercury XS CURE

Control method Knob + button
Rated power 36W
Input voltage 110V/240V 50/60Hz
Time setting 0-30 minutes
Machine size 246mm x 230mm x 363.5mm
Net weight of the machine 2.4kg
Maximum curing size 200mm x 260mm

Gross weight: 6090, Net weight: 5000, Box length: 51,00, Box width: 30,00, Box height: 30,50, GPSR Link: https://psr-assets.innpro.pl/creative_technologies/sg_creative_technologies_3d_print.pdf

Маркировка СЕ является заявлением производителя продукта о том, что продукт соответствует применимым к нему требованиям директив Европейской Комиссии.

Общая информация o: Аксессуар для 3D-принтера - ELEGOO Mercury XS Комплект для мойки и отверждения (7 000 мл мойка, УФ-отверждение)

ID товара: 164663634
Категория: Аксессуары для 3d принтеров
Количество упаковок товара: 1 шт.
Размеры и вес упаковки (1): 0,65 x 0,35 x 0,45 м, 5,5 кг
Страна продавца: Латвия
Торговая марка: ELEGOO
Продавец: Kouket, Mercora, Co2 Sp. z o.o.
Все товары этого бренда: Все товары Elegoo
Производитель: ELEGOO; Nenurodyta; [email protected]
Представитель в ЕС: Morele.net Sp. z o.o.; al. Jana Pawła II 43b, 31-864 Krokuva, Lenkija; [email protected]

Изображения продуктов приведены исключительно в иллюстративных целях и являются примерными. Ссылки на видео в описании товара предназначены только для информационных целей, поэтому информация, которую они содержат, может отличаться от самого товара. Цвета, надписи, параметры, размеры, функции и/или любые другие характеристики оригинальных продуктов из-за их визуальных характеристик могут отличаться от реальных, поэтому, пожалуйста, ознакомьтесь со спецификациями продукта, приведенными в описании продукта.

Другие также интересовались
Партнерские предложения
Реклама

Рейтинги и отзывы (0)

Аксессуар для 3D-принтера - ELEGOO Mercury XS Комплект для мойки и отверждения (7 000 мл мойка, УФ-отверждение)
Будьте первым, кто оставит отзыв!
Этот товар могут оценить только его покупатели, зарегистрированные на Pigu.lt.
Оценить товар

Вопросы и ответы (0)

Спросите об этом товаре у других покупателей!
Задать вопрос
Ваш вопрос успешно отправлен. На этот вопрос будет дан ответ в течение 3 рабочих дней
Вопрос должен состоять не менее чем из 10 символов

Рекомендуем вместе с: Аксессуар для 3D-принтера - ELEGOO Mercury XS Комплект для мойки и отверждения (7 000 мл мойка, УФ-отверждение)

Предложения других продавцов (2)

*Для предложений конкретного продавца действуют только те условия, которые указаны возле продаваемого им товара, и за всю информацию в них (включая цены) ответственен конкретный продавец.

БЕСПЛАТНО заберите в Вильнюсе, в магазине (Проспект Лайсвес 75)

1 декабря

000 €
Возможные способы доставки
14499 €

БЕСПЛАТНО заберите в Вильнюсе, в магазине (Проспект Лайсвес 75)

3 декабря

000 €
Возможные способы доставки
15566 €

Лучшие товары от Mercora