FTP connecting cable Cat.6a 20 m LB0194-20 VA0176-20 Vayox

• • Construction: AWG 26 (8*7*0.16 mm)

• • Category 6a (backwards compatible)

• • Outer shell: PVC

• • Maximum speed: 10 Gb/s

• • Category 6a S/FTP LSZH twisted pairs (each pair shielded + braid) tested after production to ensure the highest quality

• • For outdoor and indoor use

• • Terminated with factory installed RJ45 plugs

• • Finish color is orange

• • Intended for domestic and industrial use

• • RoHS certificate

• • Length: 20 m (other lengths available)

S/FTP CAT. 6a

• • The Category 6A standard is ANSI/TIA-568-C.1, established by the TIA to improve performance standards for twisted pair cabling systems. It was defined in 2009. February. Category 6A is defined for frequencies up to 500 MHz - twice that of CAT6.

• • Category 6A cables perform to better specifications, especially in the area of ​​external crosstalk, compared to Category 6 UTP (Unshielded Twisted Pair) cables, which were characterized by high external noise at high frequencies.

• • The most important issue is the operational difference between the ISO/IEC and EIA/TIA component specifications regarding the NEXT transmission parameter. At 500 MHz, ISO/IEC Cat. 6A connector performs 3dB better than EIA/TIA specification cat. 6A connector. This 3 dB equates to a 50% reduction in the crosstalk noise of the converging signal power; see section 3dB.

Shielded

Cable shielding is used to improve cable performance in high electromagnetic interference (EMI) environments. Such shielding reduces the harmful effects of EMI on the cable's data. The shielding usually runs from one end of the cable to the other using an integrity conductor running through the cable along the twisted pairs of wires. The electrical connection of the screen to the main element is made at both ends using a socket.

Specification

• • AWG 26 (8*7*0,16 mm)

• • Conductor construction: 7*0.16mm cable

• • Conductor insulation HDPE: 0.98 mm

• • Aluminum braid on each pair

• • With 80*0.12ALMG braids

• • LSZH outer insulation: 6.0 mm

• • Color black

• • Works up to 500 MHz

• • Meets ANSI/TIA/EIA-568B standards